|
FEATURES:
Front crankshaft bearing with double rubber shields
Seven port liner
Ten fin orange colored aluminum cooling head
Nylon body slide valve carburetor with 9mm venturi
INCLUDES:
RB Concept C6-BB7T Buggy Engine with turbo glow plug, slide valve
carburetor and instructions
REQUIRES:
Fuel: Car blend with 10%-25% nitro content
Tuned Pipe and Manifold depending on vehicle
Glow plug wrench and track equipment
SPECS:
Displacement: 0.21cu in (3.48cc)
Bore: 16.22mm
Stroke: 16.80mm
Intake Ports: 5+2 bypass
Exhaust Ports: 3
Crankshaft: 14mm
Carburetor Intake Diameter: 9mm
Carburetor Settings: Main Needle, 3.5 turns from closed
Idle Needle, 5 turns from closed
Weight: 12.9oz (367g)
Distance from Backplate to end of Crankshaft: 3.7" (94mm)
Height from Mounting Tab to top of Cylinder Head: 3.7" (94mm)
Center of Mounting Holes Same Side: 0.83" (21mm)
Center of Mounting Holes Opposite Side: 1.5" (37.5mm)
Mounting Hole Diameter: 0.12" (3.2mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm)
Width of Crankcase Below Mounting Tabs: 1.3" (32.5mm)
Width at Mounting Tabs: 1.8" (45mm)
Distance/Bottom of Crankcase to Crankshaft Center: 0.59" (15mm)
Distance/Exhaust Port Center to Crankshaft Center: 1.2" (30mm)
Diameter of Cooling Head: 2.4" (60mm)
|